'Azovstal' Sea Port

Scheme of Azovstal Sea Port Azovstal Sea Port on Map

INTRODUCTION

The "Azovstal" Metallurgical Plant was built in Mariupol in 1933, at the place where the Kalmius River flows into the Sea of Azov. Port waters were formed artificially; the dredging had been performed between 1932 and 1935. At first, the port specialized in handling hot agglomerate (the raw material for producing cast iron) from Kerch. Special ships were built for that purpose.

The agglomerate berths of "Azovstal& were operative until 1994, when production in Kerch was ceased. Nowadays the berhs have been decommissioned, agglomerate is transported by railway.

In the 80s two more berths were built, one for handling slag, the other for rolled metal, in order to transport the plant's production, mainly oversize plates, by sea.

In 1992 "Azovstal" port was opened to foreignvessels.

The Port Azovstal is a Sea Transport Department of the Joint Stock Company, "Azovstal" Metallurgical Plant.

PORT REGULATIONS AND NAVIGATIONAL INFORMATION

General Information

The port's territory and waters are the part of JS "Azovstal" territory.

Port "Azovstal" is connected to "Mariupol Merchant Sea Port" by a 9 mile approach channel. For more detailed information see "Mariupol Merchant Sea Port".

Navigational Conditions.

Only vessels of maximum 4.5 m draft and 200 m length are allowed into the "Azovstal" port's waters. Vessels exceeding this draft/length should consult the Harbour Master.

Pilotage.

Pilotage is compulsory when entering/leaving port and by remooring. It is provided by SE Delta-Pilot pilots.

Tug Assistance

Shipmasters should order tugs no later than 40 min before entering "Azovstal" port and 30 min before sailing.

Port Dues.

Port "Azovstal" charges are the same as the port dues in "Mariupol Merchant Sea Port".

Anchorage

While waiting for entering the port, ships can stay in its outer road at anchorage No. 458, or the one to the east of Mariupol Sea Port gate assigned to ships of max. 3.5 m draft.

Positions of the ancorages:

  • 46°57′94′′N; 37°29′22′′E;
  • 46°59′78′′N; 37°29′80′′E;
  • 47°59′82′′N; 37°33′50′′E;
  • 46°58′43′′N; 37°34′50′′E.

SPECIALIZATION.

The total port's throughput capacity is 1 million t. per year.

At present, "Azovstal" port handles mainly the plant's metal products and slag.

Because of the depth restrictions for heavy carriers, the plant's products (slabs, bars, rolled steel) can only be transported into the Black Sea and Mediterranean countries.

PORT FACILITIES

"Azovstal" port has 5 specialized berths:

  • two berths for handling agglomerate (300 m. long, 5 m deep) nearby blast furnaces. The agglomerate berths are not operated today;
  • slag berths (160 m. long, 3.5 m. deep). The slag berths are serviced by BelAz heavy trucks. Slag from trucks is discharged into special chutes;
  • rolled metal berth (200 m. long, 4.5 m. deep). Handling is carried out by a gantry crane KPM 32/16.

The rolled stock berth has railway success lines.

Cargo handling is available 24 hrs/day.

Cranes Technical Specification
Type Quantity Lifting capacity (t) Outreach (m) Outreach beyond the waterfront (m)
KPM 32/16 1 32/16 20,50

Cargo Handling Rates

Cargo handling rates are used according to the standardsr of the Ministry of Transport of Ukraine.

Storage Facilities

Total open storage area of port "Azovstal" is 4,200 sq. m.

Leave a comment